微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
改装的20英尺标准集装箱（ID:555664）
135
0
0
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 1.SLDPRT | 62.4 KB |
| 3 | 1.SLDPRT | 62.4 KB |
| 4 | 1.png | 91 KB |
| 5 | 1105.0445.SLDPRT | 50.6 KB |
| 6 | 1105.0445.SLDPRT | 50.6 KB |
| 7 | 1117.6_side.SLDPRT | 50.3 KB |
| 8 | 1117.6_side.SLDPRT | 50.3 KB |
| 9 | 1140 inclined assembly.SLDASM | 67.7 KB |
| 10 | 1140 inclined assembly.SLDASM | 68.5 KB |
| 11 | 1140 inclined assembly_right.SLDASM | 67.3 KB |
| 12 | 1140 inclined assembly_right.SLDASM | 67.3 KB |
| 13 | 1358.9.SLDPRT | 49.8 KB |
| 14 | 1358.9.SLDPRT | 49.8 KB |
| 15 | 1550.SLDPRT | 58.9 KB |
| 16 | 1550.SLDPRT | 58.9 KB |
| 17 | 1st plate.SLDPRT | 51.2 KB |
| 18 | 1st plate.SLDPRT | 51.2 KB |
| 19 | 2.SLDPRT | 61.2 KB |
| 20 | 2.SLDPRT | 61.2 KB |
| 21 | 2.png | 98.8 KB |
| 22 | 20x20 tube.SLDPRT | 53.6 KB |
| 23 | 2870.2_top1.SLDPRT | 48.9 KB |
| 24 | 2870.2_top1.SLDPRT | 48.9 KB |
| 25 | 3.SLDPRT | 60.5 KB |
| 26 | 3.SLDPRT | 60.5 KB |
| 27 | 4 inch tube.SLDPRT | 69.4 KB |
| 28 | 4 inch tube2.SLDPRT | 65.2 KB |
| 29 | 4.SLDPRT | 62.5 KB |
| 30 | 4.SLDPRT | 62.5 KB |
| 31 | 5.SLDPRT | 63.3 KB |
| 32 | 5.SLDPRT | 63.3 KB |
| 33 | 6.SLDPRT | 72.6 KB |
| 34 | 6.SLDPRT | 72.6 KB |
| 35 | 7.SLDPRT | 71.1 KB |
| 36 | 7.SLDPRT | 71.1 KB |
| 37 | 8.SLDPRT | 63.5 KB |
| 38 | 8.SLDPRT | 63.5 KB |
| 39 | 86DIANJI.sldprt | 75.5 KB |
| 40 | 86DIANJI.sldprt | 75.5 KB |
| 41 | 86DIANJI.sldprt | 75.5 KB |
| 42 | 941.2_base1.SLDPRT | 36.2 KB |
| 43 | 941.2_base1.SLDPRT | 36.2 KB |
| 44 | Assem1.SLDASM | 217 KB |
| 45 | Bailey-211348.sldasm | 1.82 MB |
| 46 | Bailey-211348_172-213 - R-Clip - Expanded.sldprt | 26.4 KB |
| 47 | Bailey-211348_276-001 - ROD CLEVIS - MACHINED (TYPE II).sldprt | 118 KB |
| 48 | Bailey-211348_278-003 (1.25 inch) and 278-004 (1.5 inch) - Machining - Gland 3.0 inch TCU3_278-003 _ 1.25 BORE.sldprt | 75.3 KB |
| 49 | Bailey-211348_3.0 inch TCU2-TCU3 Tie rod_800027-8.0 & 8.0_ ASAE.sldprt | 23.6 KB |
| 50 | Bailey-211348_Clevis Pin - Both sides R-Clip.sldprt | 25.6 KB |
| 51 | Bailey-211348_Hex Nut Style 1_AM_B18.2.4.1M - Hex nut, Style 1, M12 x 1.75 --D-S.sldprt | 34.6 KB |
| 52 | Bailey-211348_Hexagon Nut Style 1_IS_IS 1364-3 - M10-D-S.sldprt | 33.8 KB |
| 53 | Bailey-211348_M24 x 2 Nylock nut.sldprt | 86.4 KB |
| 54 | Bailey-211348_Machining -Base End-3.0 inch TCU3 - Config 1.0 inch and 1.25 inch pin holes.sldprt | 272 KB |
| 55 | Bailey-211348_SAE 8 - 3-4 - 16 UNF.sldprt | 51.2 KB |
| 56 | Bailey-211348_TCU3 - 3.0 inch bore cylinder - 1.25 inch Piston rod_211348.sldprt | 27.2 KB |
| 57 | Bailey-211348_TUBE 3.0 INCH_211348.sldprt | 23.1 KB |
| 58 | Bailey-211348_Universal Piston.sldprt | 37 KB |
| 59 | Bailey-211348_hhb(grade b)_is_IS 1364 HHB(Grade B) - M10 x 60 x 26-S.sldprt | 37.9 KB |
| 60 | Base.SLDASM | 312 KB |
| 61 | BaseList.SLDPRT | 50.9 KB |
| 62 | BaseListSmall.SLDPRT | 56.4 KB |
| 63 | BigPlank.SLDPRT | 257 KB |
| 64 | BottomEndChannel.SLDPRT | 121 KB |
| 65 | BottomSideRail.SLDPRT | 97.3 KB |
| 66 | Bracket.SLDPRT | 107 KB |
| 67 | Bracket2.SLDPRT | 68 KB |
| 68 | BracketSmall.SLDPRT | 101 KB |
| 69 | BracketSmall2.SLDPRT | 70 KB |
| 70 | Cam.SLDPRT | 110 KB |
| 71 | CornerDLF.SLDPRT | 172 KB |
| 72 | CornerDRF.SLDPRT | 216 KB |
| 73 | CornerTLF.SLDPRT | 223 KB |
| 74 | CornerTRF.SLDPRT | 188 KB |
| 75 | CortenCornerPost.SLDPRT | 128 KB |
| 76 | CortenCornerPostLeft.SLDPRT | 157 KB |
| 77 | DEFAULT-17145.sldprt | 49.5 KB |
| 78 | DEFAULT-17145_1.sldprt | 49.5 KB |
| 79 | DEFAULT-17145_1.sldprt | 49.5 KB |
| 80 | DEFAULT-22973.sldprt | 50 KB |
| 81 | DEFAULT-22973.sldprt | 50.5 KB |
| 82 | DEFAULT-22973.sldprt | 50.5 KB |
| 83 | DEFAULT-33207.sldprt | 140 KB |
| 84 | DEFAULT-33207.sldprt | 210 KB |
| 85 | DEFAULT-33207_1.sldprt | 140 KB |
| 86 | DEFAULT-33207_1.sldprt | 140 KB |
| 87 | DEFAULT-41763.sldprt | 55.5 KB |
| 88 | DEFAULT-41763.sldprt | 55.5 KB |
| 89 | DEFAULT-41763.sldprt | 56 KB |
| 90 | DEFAULT-42453.sldprt | 49 KB |
| 91 | DEFAULT-42453_1.sldprt | 49 KB |
| 92 | DEFAULT-42453_1.sldprt | 49.5 KB |
| 93 | DEFAULT-43167.sldprt | 49 KB |
| 94 | DEFAULT-43167.sldprt | 49 KB |
| 95 | DEFAULT-43167.sldprt | 49 KB |
| 96 | DEFAULT-43913.sldprt | 50 KB |
| 97 | DEFAULT-43913_1.sldprt | 50.5 KB |
| 98 | DEFAULT-43913_1.sldprt | 50.5 KB |
| 99 | DEFAULT-44619.sldprt | 50 KB |
| 100 | DEFAULT-44619.sldprt | 50.5 KB |
| 101 | DEFAULT-44619.sldprt | 50.5 KB |
| 102 | DEFAULT-45141.sldprt | 47.5 KB |
| 103 | DEFAULT-45141.sldprt | 47.5 KB |
| 104 | DEFAULT-45141.sldprt | 47.5 KB |
| 105 | DEFAULT-47627.sldprt | 64.5 KB |
| 106 | DEFAULT-47627.sldprt | 64.5 KB |
| 107 | DEFAULT-47627.sldprt | 64.5 KB |
| 108 | DEFAULT-48693.sldprt | 48.5 KB |
| 109 | DEFAULT-48693.sldprt | 48.5 KB |
| 110 | DEFAULT-48693.sldprt | 49 KB |
| 111 | DEFAULT-52911.sldprt | 126 KB |
| 112 | DEFAULT-52911.sldprt | 127 KB |
| 113 | DEFAULT-52911.sldprt | 127 KB |
| 114 | DEFAULT-53845.sldprt | 48 KB |
| 115 | DEFAULT-53845.sldprt | 48 KB |
| 116 | DEFAULT-53845.sldprt | 48 KB |
| 117 | DEFAULT-54547.sldprt | 50 KB |
| 118 | DEFAULT-54547.sldprt | 50.5 KB |
| 119 | DEFAULT-54547.sldprt | 50.5 KB |
| 120 | DEFAULT-58975.sldprt | 78 KB |
| 121 | DEFAULT-58975.sldprt | 78 KB |
| 122 | DEFAULT-58975.sldprt | 78 KB |
| 123 | DEFAULT-62649.sldprt | 126 KB |
| 124 | DEFAULT-62649.sldprt | 126 KB |
| 125 | DEFAULT-62649.sldprt | 126 KB |
| 126 | DEFAULT-65007.sldprt | 58 KB |
| 127 | DEFAULT-65007.sldprt | 58 KB |
| 128 | DEFAULT-65007.sldprt | 58 KB |
| 129 | DEFAULT-65957.sldprt | 48 KB |
| 130 | DEFAULT-65957.sldprt | 48 KB |
| 131 | DEFAULT-65957.sldprt | 48 KB |
| 132 | DM_112X36_FB.sldasm | 146 KB |
| 133 | Door.SLDASM | 558 KB |
| 134 | DoorFrame.SLDPRT | 75.8 KB |
| 135 | DoorHandle.SLDPRT | 120 KB |
| 136 | DoorHearChannel.SLDPRT | 106 KB |
| 137 | DoorHearPlate.SLDPRT | 70.7 KB |
| 138 | DoorSillChannel.SLDPRT | 138 KB |
| 139 | DoorWall.SLDPRT | 107 KB |
| 140 | DoorWallLeft.SLDPRT | 80.2 KB |
| 141 | DoorWallRight.SLDPRT | 80.3 KB |
| 142 | EndHearPlate.SLDPRT | 69.6 KB |
| 143 | EndWall.SLDPRT | 89.3 KB |
| 144 | FUZAITAI_ASM.sldasm | 26.9 KB |
| 145 | FUZAITAI_ASM_1.sldasm | 27.9 KB |
| 146 | Fix.SLDASM | 300 KB |
| 147 | Fix.SLDPRT | 87.6 KB |
| 148 | Fix2.SLDPRT | 209 KB |
| 149 | FixHandle.SLDPRT | 93.4 KB |
| 150 | FixRight.SLDASM | 316 KB |
| 151 | Fixator.SLDPRT | 107 KB |
| 152 | FrontEnd.SLDASM | 689 KB |
| 153 | FrontSill.SLDPRT | 70.7 KB |
| 154 | Full table assembly.SLDASM | 1.42 MB |
| 155 | Full table assembly.SLDASM | 1.42 MB |
| 156 | Full table assembly_smaller size.zip | 9.23 MB |
| 157 | Full table assembly_smaller size.zip | 9.23 MB |
| 158 | GANGDAI.sldprt | 42.4 KB |
| 159 | GANGDAI.sldprt | 45.5 KB |
| 160 | GANGDAI.sldprt | 45.5 KB |
| 161 | GANGDAIGUDINGBAN.sldprt | 49.5 KB |
| 162 | GANGDAIGUDINGBAN.sldprt | 50 KB |
| 163 | GANGDAIGUDINGBAN.sldprt | 50 KB |
| 164 | GANGDAI_1.sldprt | 42.2 KB |
| 165 | GANGDAI_2.sldprt | 42 KB |
| 166 | General.SLDASM | 1.89 MB |
| 167 | HOUGAI_ASM.sldasm | 21.2 KB |
| 168 | HOUGAI_ASM.sldasm | 22.4 KB |
| 169 | HUACAO.sldprt | 135 KB |
| 170 | HUACAO.sldprt | 82.5 KB |
| 171 | HUACAO.sldprt | 83 KB |
| 172 | Hinge.SLDASM | 95.6 KB |
| 173 | HingeBash.SLDPRT | 67 KB |
| 174 | HingeLug.SLDPRT | 169 KB |
| 175 | HingePin.SLDPRT | 38 KB |
| 176 | Lock.SLDPRT | 55.7 KB |
| 177 | Part1.SLDPRT | 101 KB |
| 178 | Part123.SLDPRT | 39.2 KB |
| 179 | Part2.SLDPRT | 78.5 KB |
| 180 | Part3.SLDPRT | 41.2 KB |
| 181 | QIANGAI_ASM.sldasm | 21.2 KB |
| 182 | QIANGAI_ASM.sldasm | 22.8 KB |
| 183 | RearCornerCoverPlate.SLDPRT | 74 KB |
| 184 | RearCornerPost.SLDPRT | 114 KB |
| 185 | RearCornerPostRight.SLDPRT | 160 KB |
| 186 | Roof.SLDASM | 482 KB |
| 187 | RoofWall for hinge.SLDPRT | 419 KB |
| 188 | RoofWall for top.SLDPRT | 430 KB |
| 189 | RoofWall.SLDPRT | 406 KB |
| 190 | Screw.SLDPRT | 361 KB |
| 191 | Seal.SLDPRT | 43.9 KB |
| 192 | Sha.SLDPRT | 71.3 KB |
| 193 | Shim.SLDPRT | 102 KB |
| 194 | Side.SLDASM | 512 KB |
| 195 | SideWall.SLDPRT | 112 KB |
| 196 | SmallPlank.SLDPRT | 296 KB |
| 197 | Structure assembly.SLDASM | 1.03 MB |
| 198 | Structure assembly.SLDASM | 1.06 MB |
| 199 | Table outer thin sheet_assembly.SLDASM | 196 KB |
| 200 | Table outer thin sheet_assembly.SLDASM | 196 KB |
| 201 | Table top.SLDPRT | 143 KB |
| 202 | Table top.SLDPRT | 143 KB |
| 203 | Table.SLDASM | 153 KB |
| 204 | Table.SLDASM | 153 KB |
| 205 | TopSideRail.SLDPRT | 51.6 KB |
| 206 | Tube.SLDPRT | 35.5 KB |
| 207 | TubeFix.SLDPRT | 282 KB |
| 208 | Untitled.JPG | 614 KB |
| 209 | Untitled.JPG | 614 KB |
| 210 | Untitled123.JPG | 460 KB |
| 211 | Untitled2.JPG | 466 KB |
| 212 | Untitled3.JPG | 600 KB |
| 213 | WideCrossmember.SLDPRT | 67.3 KB |
| 214 | WideCrossmemberRib.SLDPRT | 93.2 KB |
| 215 | X.BAT | 102 B |
| 216 | X.BAT | 39 B |
| 217 | _DM_112_sleeve_nut_sn_8.sldprt | 32.9 KB |
| 218 | _DM_112x36_FB_0_0_rod_6.sldprt | 33.7 KB |
| 219 | _DM_112x36_FB_0_0_shaft_18.sldprt | 29.5 KB |
| 220 | _DM_112x36_FB_0_0_tube_2.sldprt | 30.9 KB |
| 221 | _DM_112x36_FB_0_be1_16.sldprt | 122 KB |
| 222 | _DM_112x36_FB_0_re1_4.sldprt | 114 KB |
| 223 | angle.SLDPRT | 53.2 KB |
| 224 | angle.SLDPRT | 53.2 KB |
| 225 | base plate.SLDPRT | 32.6 KB |
| 226 | base.assembly.SLDASM | 3.52 MB |
| 227 | big plate.SLDPRT | 61.3 KB |
| 228 | big plate.SLDPRT | 61.3 KB |
| 229 | bracket for door.SLDPRT | 48.4 KB |
| 230 | central final sliding.SLDASM | 538 KB |
| 231 | central final sliding.SLDASM | 538 KB |
| 232 | central final sliding_opposite.SLDASM | 397 KB |
| 233 | central final sliding_opposite.SLDASM | 398 KB |
| 234 | central sliding.SLDPRT | 766 KB |
| 235 | central sliding.SLDPRT | 766 KB |
| 236 | central sliding_opposite.SLDPRT | 626 KB |
| 237 | central sliding_opposite.SLDPRT | 626 KB |
| 238 | cleat for holes.SLDPRT | 93.1 KB |
| 239 | door assembly.SLDASM | 1.81 MB |
| 240 | floor wodden plate.SLDPRT | 121 KB |
| 241 | flying door.SLDPRT | 563 KB |
| 242 | frame for assembly.SLDPRT | 404 KB |
| 243 | frame for assembly.SLDPRT | 407 KB |
| 244 | frame support.SLDPRT | 59.3 KB |
| 245 | full curve.SLDPRT | 187 KB |
| 246 | full curve.SLDPRT | 187 KB |
| 247 | hinge 1.SLDPRT | 57.2 KB |
| 248 | hinge 2.SLDPRT | 65.7 KB |
| 249 | hinge and moveable top section.SLDASM | 184 KB |
| 250 | hinge for assembly.ipt | 626 KB |
| 251 | hinge pin 4ft.ipt | 87.5 KB |
| 252 | hinge pin.ipt | 93.5 KB |
| 253 | hinge refined 【屿双网】.igs | 698 KB |
| 254 | hinge refined.ipt | 524 KB |
| 255 | hinge refined.stp | 316 KB |
| 256 | hinge.ipt | 480 KB |
| 257 | hydraulic cylinder support.SLDPRT | 97.4 KB |
| 258 | incline assembly right side.SLDASM | 66.8 KB |
| 259 | incline assembly right side.SLDASM | 67.1 KB |
| 260 | incline assembly.SLDASM | 67.6 KB |
| 261 | incline assembly.SLDASM | 67.9 KB |
| 262 | incline_1140.1832.SLDPRT | 60.5 KB |
| 263 | incline_1140.1832.SLDPRT | 60.5 KB |
| 264 | incline_1203.7807.SLDPRT | 57.2 KB |
| 265 | incline_1203.7807.SLDPRT | 60.1 KB |
| 266 | lower hydraulic cylinder support.SLDPRT | 92.3 KB |
| 267 | new sliding.SLDPRT | 1.07 MB |
| 268 | new sliding.SLDPRT | 916 KB |
| 269 | new sliding_opposite.SLDPRT | 733 KB |
| 270 | new sliding_opposite.SLDPRT | 922 KB |
| 271 | overall top assembly.SLDASM | 1.93 MB |
| 272 | overall-assembly-donot change.SLDASM | 941 KB |
| 273 | overall-assembly.SLDASM | 5.71 MB |
| 274 | partserver02017100602444283630425192d056f.zip | 202 KB |
| 275 | piano hinge 【屿双网】.igs | 585 KB |
| 276 | piano hinge 2.JPG | 53.4 KB |
| 277 | piano hinge update 【屿双网】.igs | 1.76 MB |
| 278 | piano hinge update.iam | 63 KB |
| 279 | piano hinge update.stp | 842 KB |
| 280 | piano hinge.JPG | 500 KB |
| 281 | piano hinge.bmp | 2.77 MB |
| 282 | piano hinge.iam | 74 KB |
| 283 | piano hinge.stp | 214 KB |
| 284 | piano-hinge-heavy-duty-4-1.snapshot.5.zip | 9.56 MB |
| 285 | piano-hinge-mcmaster-part-1658a731-1.snapshot.3.zip | 1.45 MB |
| 286 | piano_hinge_MM_1658A731.SLDASM | 126 KB |
| 287 | piano_hinge_MM_1658A731_A.SLDPRT | 191 KB |
| 288 | piano_hinge_MM_1658A731_B.SLDPRT | 189 KB |
| 289 | plate1.SLDPRT | 35.2 KB |
| 290 | plate2.SLDPRT | 36.5 KB |
| 291 | roof hinge.SLDPRT | 637 KB |
| 292 | s1.SLDPRT | 58.4 KB |
| 293 | s1.SLDPRT | 58.4 KB |
| 294 | s2.SLDPRT | 57.8 KB |
| 295 | s2.SLDPRT | 57.8 KB |
| 296 | s3.SLDPRT | 60.1 KB |
| 297 | s3.SLDPRT | 60.1 KB |
| 298 | s4.SLDPRT | 61.9 KB |
| 299 | s4.SLDPRT | 61.9 KB |
| 300 | s5.SLDPRT | 62.5 KB |
| 301 | s5.SLDPRT | 62.5 KB |
| 302 | s6.SLDPRT | 59.8 KB |
| 303 | s6.SLDPRT | 59.8 KB |
| 304 | side opening door.SLDASM | 245 KB |
| 305 | sliding assembly.SLDASM | 46.2 KB |
| 306 | sliding frame.SLDPRT | 76.2 KB |
| 307 | sliding plate.SLDPRT | 33.4 KB |
| 308 | small plate.SLDPRT | 49.1 KB |
| 309 | small plate.SLDPRT | 49.1 KB |
| 310 | stepper slide.SLDASM | 1.78 MB |
| 311 | stepper slide.stp | 1.42 MB |
| 312 | support tube struture.SLDPRT | 60.7 KB |
| 313 | table assembly.SLDASM | 1.38 MB |
| 314 | table assembly.SLDASM | 2.84 MB |
| 315 | table bottom plate.SLDPRT | 39.3 KB |
| 316 | table door.SLDPRT | 243 KB |
| 317 | table door.SLDPRT | 367 KB |
| 318 | table side_1.SLDPRT | 110 KB |
| 319 | table side_1.SLDPRT | 110 KB |
| 320 | table.SLDPRT | 1.83 MB |
| 321 | table.SLDPRT | 3.82 MB |
| 322 | tube.1.SLDPRT | 58.1 KB |
| 323 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 324 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要40金币
图纸ID：555664
文件大小：92.92M
软件版本：SOLIDWORKS 2016,INVENTOR,IGES,STEP
图纸格式：sldprt,sldasm,ipt,igs
参数/编辑：可修改，包括参数
上传时间：2024-02-27
图纸介绍：
发布者
屿双网oxvn
作品: 3
粉丝: 0
提示
×
下载该图档需要消耗40金币！
确认下载
客服
签到
分享
