微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
详细的汽车悬挂系统（ID:560789）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 8-15in 5 hole rim.ipt | 622 KB |
| 3 | ABS sensor 3.ipt | 1.39 MB |
| 4 | ABS sensor 3.ipt | 1.4 MB |
| 5 | ABS sensor 4.ipt | 1.56 MB |
| 6 | ABS sensor 41.ipt | 1.57 MB |
| 7 | ANSI (in) 【屿双网】.dwg | 156 KB |
| 8 | ANSI (in) 【屿双网】.dwg | 156 KB |
| 9 | ANSI (in).idw | 159 KB |
| 10 | ANSI (in).idw | 159 KB |
| 11 | ANSI (mm) 【屿双网】.dwg | 154 KB |
| 12 | ANSI (mm) 【屿双网】.dwg | 154 KB |
| 13 | ANSI (mm).idw | 158 KB |
| 14 | ANSI (mm).idw | 158 KB |
| 15 | Assembly drawings.tr | 2.76 KB |
| 16 | Assembly drawings.tr | 2.76 KB |
| 17 | Assembly drawings.tr | 2.76 KB |
| 18 | Assembly drawings.tr | 2.76 KB |
| 19 | Assembly7.iam | 2.91 MB |
| 20 | Autodesk_Logo_Black.png | 4.79 KB |
| 21 | Autodesk_Logo_Black.png | 4.79 KB |
| 22 | Autodesk_Logo_Black.png | 4.79 KB |
| 23 | Autodesk_Logo_Black.png | 4.79 KB |
| 24 | BSI 【屿双网】.dwg | 113 KB |
| 25 | BSI 【屿双网】.dwg | 113 KB |
| 26 | BSI.idw | 117 KB |
| 27 | BSI.idw | 117 KB |
| 28 | Ball Joint 2b.ipt | 407 KB |
| 29 | Ball Joint 2b.ipt | 414 KB |
| 30 | Ball Joint 2b1.ipt | 401 KB |
| 31 | Ball Joint 2b2.ipt | 411 KB |
| 32 | Ball Joint Lower 2.ipt | 131 KB |
| 33 | Ball Joint Lower 2.ipt | 131 KB |
| 34 | Ball Joint Lower 3.ipt | 113 KB |
| 35 | Ball Joint Steering Upper.ipt | 638 KB |
| 36 | Ball Joint Steering Upper.ipt | 639 KB |
| 37 | Ball Joint Steering Upper1.ipt | 621 KB |
| 38 | Ball Joint Steering.ipt | 179 KB |
| 39 | Ball Joint Steering.ipt | 180 KB |
| 40 | Ball Joint Steering1.ipt | 157 KB |
| 41 | Ball Joint.ipt | 143 KB |
| 42 | Ball Joint.ipt | 150 KB |
| 43 | Ball Joint1.ipt | 123 KB |
| 44 | Ball Joint2.ipt | 136 KB |
| 45 | Balloon.xml | 59.3 KB |
| 46 | Balloon.xml | 59.3 KB |
| 47 | Bracket Lower control Arm.ipt | 237 KB |
| 48 | Bracket Lower control Arm.ipt | 238 KB |
| 49 | Bracket Lower control Arm1.ipt | 194 KB |
| 50 | Bracket Upper Control Arm.ipt | 240 KB |
| 51 | Bracket Upper Control Arm.ipt | 241 KB |
| 52 | Bracket Upper Control Arm1.ipt | 204 KB |
| 53 | Brake Caliper.ipt | 5.82 MB |
| 54 | Brake Caliper1.ipt | 5.89 MB |
| 55 | Brake assembly.iam | 122 KB |
| 56 | Cable&HarnessDefaultLibrary.iwl | 412 KB |
| 57 | Cable&HarnessDefaultLibrary.iwl | 412 KB |
| 58 | Caliper assembly.iam | 62.5 KB |
| 59 | Caliper.ipt | 5.11 MB |
| 60 | Castle Nut.ipt | 339 KB |
| 61 | Castle Nut1.ipt | 344 KB |
| 62 | CenterMark.xml | 10.4 KB |
| 63 | CenterMark.xml | 10.4 KB |
| 64 | Clamp.ipt | 169 KB |
| 65 | Clearance.xls | 123 KB |
| 66 | Clearance.xls | 123 KB |
| 67 | Coilover Bolt.ipt | 295 KB |
| 68 | Coilover Bolt.ipt | 295 KB |
| 69 | Coilover Nut.ipt | 284 KB |
| 70 | Coilover Nut.ipt | 284 KB |
| 71 | Coilover.ipt | 3.57 MB |
| 72 | Coilover.ipt | 3.58 MB |
| 73 | Coilover1.ipt | 3.65 MB |
| 74 | Cold punching parts.tr | 1.54 KB |
| 75 | Cold punching parts.tr | 1.54 KB |
| 76 | Cold punching parts.tr | 1.54 KB |
| 77 | Cold punching parts.tr | 1.54 KB |
| 78 | CommonSchema.xml | 2.22 KB |
| 79 | CommonSchema.xml | 2.22 KB |
| 80 | ConcreteStructuralUI.xml | 12.3 KB |
| 81 | ConcreteStructuralUI.xml | 12.3 KB |
| 82 | Configuration.htm | 19.3 KB |
| 83 | Configuration.htm | 19.3 KB |
| 84 | Configuration.htm | 32.6 KB |
| 85 | Configuration.htm | 32.6 KB |
| 86 | Constraint.htm | 744 B |
| 87 | Constraint.htm | 744 B |
| 88 | Constraint.htm | 746 B |
| 89 | Constraint.htm | 746 B |
| 90 | Contact.htm | 328 B |
| 91 | Contact.htm | 328 B |
| 92 | Contact.htm | 328 B |
| 93 | Contact.htm | 328 B |
| 94 | Control Arm Bolts.ipt | 290 KB |
| 95 | Control Arm Bolts.ipt | 290 KB |
| 96 | Control Arm Nuts.ipt | 271 KB |
| 97 | Control Arm Nuts.ipt | 271 KB |
| 98 | Cotter Pin 2.ipt | 165 KB |
| 99 | Cotter Pin 3.ipt | 174 KB |
| 100 | DIN 【屿双网】.dwg | 124 KB |
| 101 | DIN 【屿双网】.dwg | 124 KB |
| 102 | DIN.idw | 128 KB |
| 103 | DIN.idw | 128 KB |
| 104 | DatumTarget.xml | 30.3 KB |
| 105 | DatumTarget.xml | 30.3 KB |
| 106 | Defaults.ini | 3.73 KB |
| 107 | Defaults.ini | 3.73 KB |
| 108 | Dimension.xml | 2.93 MB |
| 109 | Dimension.xml | 2.93 MB |
| 110 | Electrical cases.tr | 2.13 KB |
| 111 | Electrical cases.tr | 2.13 KB |
| 112 | Electrical cases.tr | 2.13 KB |
| 113 | Electrical cases.tr | 2.13 KB |
| 114 | ExternalMaterialMapping.xml | 23.1 KB |
| 115 | ExternalMaterialMapping.xml | 23.1 KB |
| 116 | FaceLoops.xml | 6.31 KB |
| 117 | FaceLoops.xml | 6.31 KB |
| 118 | FeatureAutoname.xml | 16.1 KB |
| 119 | FeatureAutoname.xml | 16.1 KB |
| 120 | FeatureControlFrame.xml | 29.7 KB |
| 121 | FeatureControlFrame.xml | 29.7 KB |
| 122 | Figure.htm | 444 B |
| 123 | Figure.htm | 444 B |
| 124 | Figure.htm | 444 B |
| 125 | Figure.htm | 444 B |
| 126 | FlatPattern.xml | 6.76 KB |
| 127 | FlatPattern.xml | 6.76 KB |
| 128 | FlatPatternExportOpts.xml | 1.63 KB |
| 129 | FlatPatternExportOpts.xml | 1.63 KB |
| 130 | Forged parts.tr | 1.52 KB |
| 131 | Forged parts.tr | 1.52 KB |
| 132 | Forged parts.tr | 1.52 KB |
| 133 | Forged parts.tr | 1.52 KB |
| 134 | GB 【屿双网】.dwg | 152 KB |
| 135 | GB 【屿双网】.dwg | 152 KB |
| 136 | GB.idw | 155 KB |
| 137 | GB.idw | 155 KB |
| 138 | GOST 【屿双网】.dwg | 279 KB |
| 139 | GOST 【屿双网】.dwg | 279 KB |
| 140 | GOST.idw | 288 KB |
| 141 | GOST.idw | 288 KB |
| 142 | GenericStructuralUI.xml | 11.9 KB |
| 143 | GenericStructuralUI.xml | 11.9 KB |
| 144 | Grease Nipple M5-Straight.ipt | 205 KB |
| 145 | Grease Nipple M5-Straight.ipt | 205 KB |
| 146 | Grease Nipple M5-Straight1.ipt | 192 KB |
| 147 | Grease Nipple M5-Straight2.ipt | 198 KB |
| 148 | Grease Nipple M5-Straight3.ipt | 192 KB |
| 149 | Hatch.xml | 6.71 KB |
| 150 | Hatch.xml | 6.71 KB |
| 151 | HoleTable.xml | 1.24 MB |
| 152 | HoleTable.xml | 1.24 MB |
| 153 | Hub.ipt | 507 KB |
| 154 | ISO 【屿双网】.dwg | 115 KB |
| 155 | ISO 【屿双网】.dwg | 115 KB |
| 156 | ISO.idw | 119 KB |
| 157 | ISO.idw | 119 KB |
| 158 | Id.xml | 40.5 KB |
| 159 | Id.xml | 40.5 KB |
| 160 | InventorMaterialLibrary-chs.xlf | 794 KB |
| 161 | InventorMaterialLibrary-chs.xlf | 794 KB |
| 162 | InventorMaterialLibrary-cht.xlf | 793 KB |
| 163 | InventorMaterialLibrary-cht.xlf | 793 KB |
| 164 | InventorMaterialLibrary-csy.xlf | 830 KB |
| 165 | InventorMaterialLibrary-csy.xlf | 830 KB |
| 166 | InventorMaterialLibrary-deu.xlf | 822 KB |
| 167 | InventorMaterialLibrary-deu.xlf | 822 KB |
| 168 | InventorMaterialLibrary-eng.xlf | 801 KB |
| 169 | InventorMaterialLibrary-eng.xlf | 801 KB |
| 170 | InventorMaterialLibrary-esp.xlf | 822 KB |
| 171 | InventorMaterialLibrary-esp.xlf | 822 KB |
| 172 | InventorMaterialLibrary-fra.xlf | 821 KB |
| 173 | InventorMaterialLibrary-fra.xlf | 821 KB |
| 174 | InventorMaterialLibrary-hun.xlf | 824 KB |
| 175 | InventorMaterialLibrary-hun.xlf | 824 KB |
| 176 | InventorMaterialLibrary-ita.xlf | 829 KB |
| 177 | InventorMaterialLibrary-ita.xlf | 829 KB |
| 178 | InventorMaterialLibrary-jpn.xlf | 844 KB |
| 179 | InventorMaterialLibrary-jpn.xlf | 844 KB |
| 180 | InventorMaterialLibrary-kor.xlf | 820 KB |
| 181 | InventorMaterialLibrary-kor.xlf | 820 KB |
| 182 | InventorMaterialLibrary-plk.xlf | 832 KB |
| 183 | InventorMaterialLibrary-plk.xlf | 832 KB |
| 184 | InventorMaterialLibrary-ptb.xlf | 821 KB |
| 185 | InventorMaterialLibrary-ptb.xlf | 821 KB |
| 186 | InventorMaterialLibrary-rus.xlf | 957 KB |
| 187 | InventorMaterialLibrary-rus.xlf | 957 KB |
| 188 | InventorMaterialLibrary.adsklib | 131 KB |
| 189 | InventorMaterialLibrary.adsklib | 131 KB |
| 190 | Involute Spline Connection2.iam | 38.5 KB |
| 191 | Involute Spline Connection2.iam | 38.5 KB |
| 192 | Involute Spline Connection3.iam | 50.5 KB |
| 193 | JIS 【屿双网】.dwg | 115 KB |
| 194 | JIS 【屿双网】.dwg | 115 KB |
| 195 | JIS.idw | 117 KB |
| 196 | JIS.idw | 117 KB |
| 197 | Layers.xml | 154 KB |
| 198 | Layers.xml | 154 KB |
| 199 | Leader.xml | 47.5 KB |
| 200 | Leader.xml | 47.5 KB |
| 201 | Lighting.xml | 26.7 KB |
| 202 | Lighting.xml | 26.7 KB |
| 203 | Load.htm | 724 B |
| 204 | Load.htm | 724 B |
| 205 | Load.htm | 724 B |
| 206 | Load.htm | 724 B |
| 207 | Lower Ball Joint 2a.ipt | 423 KB |
| 208 | Lower Ball Joint 2a.ipt | 430 KB |
| 209 | Lower Ball Joint 2a1.ipt | 415 KB |
| 210 | Lower Ball Joint 2a2.ipt | 424 KB |
| 211 | Lower Ball Joint Nut.ipt | 226 KB |
| 212 | Lower Ball Joint Nut.ipt | 226 KB |
| 213 | Main.htm | 5.28 KB |
| 214 | Main.htm | 5.28 KB |
| 215 | Main.htm | 5.4 KB |
| 216 | Main.htm | 5.4 KB |
| 217 | Material.htm | 1.04 KB |
| 218 | Material.htm | 1.04 KB |
| 219 | Material.htm | 1.05 KB |
| 220 | Material.htm | 1.05 KB |
| 221 | MaterialMapping.xml | 202 KB |
| 222 | MaterialMapping.xml | 202 KB |
| 223 | MaterialsFavorites.xml | 4.51 KB |
| 224 | MaterialsFavorites.xml | 4.51 KB |
| 225 | Maxxis M8090.ipt | 11.5 MB |
| 226 | Mechanical parts.tr | 2.12 KB |
| 227 | Mechanical parts.tr | 2.12 KB |
| 228 | Mechanical parts.tr | 2.12 KB |
| 229 | Mechanical parts.tr | 2.12 KB |
| 230 | MetalStructuralUI.xml | 12 KB |
| 231 | MetalStructuralUI.xml | 12 KB |
| 232 | Mold Design (DIN).iam | 64.5 KB |
| 233 | Mold Design (DIN).iam | 64.5 KB |
| 234 | Mold Design (in).iam | 66 KB |
| 235 | Mold Design (in).iam | 66 KB |
| 236 | Mold Design (mm).iam | 64.5 KB |
| 237 | Mold Design (mm).iam | 64.5 KB |
| 238 | Mold Design Stop Pin.ipt | 80 KB |
| 239 | Mold Design Stop Pin.ipt | 80 KB |
| 240 | Mold Design.iam | 66 KB |
| 241 | Mold Design.iam | 66 KB |
| 242 | Mold parts.tr | 2.51 KB |
| 243 | Mold parts.tr | 2.51 KB |
| 244 | Mold parts.tr | 2.51 KB |
| 245 | Mold parts.tr | 2.51 KB |
| 246 | Nipple with rubber hat.iam | 56 KB |
| 247 | Nipple.ipt | 165 KB |
| 248 | Nut.ipt | 207 KB |
| 249 | ObjectDefaults.xml | 476 KB |
| 250 | ObjectDefaults.xml | 476 KB |
| 251 | Overflow nipple.ipt | 145 KB |
| 252 | Overrun tube.ipt | 126 KB |
| 253 | Pad 1.ipt | 1010 KB |
| 254 | Pad 2.ipt | 484 KB |
| 255 | Part10.ipt | 91 KB |
| 256 | Part6^Brake assembly.ipt | 277 KB |
| 257 | PartsList.xml | 314 KB |
| 258 | PartsList.xml | 314 KB |
| 259 | PartsListGroup1.xls | 65.5 KB |
| 260 | PartsListGroup1.xls | 65.5 KB |
| 261 | PartsListGroup1b.xls | 71.5 KB |
| 262 | PartsListGroup1b.xls | 71.5 KB |
| 263 | PartsListTemplate.xls | 55 KB |
| 264 | PartsListTemplate.xls | 55 KB |
| 265 | PhysMatSchema.xml | 3.26 KB |
| 266 | PhysMatSchema.xml | 3.26 KB |
| 267 | PhysMatUI.xml | 3.01 KB |
| 268 | PhysMatUI.xml | 3.01 KB |
| 269 | Pin.ipt | 67.5 KB |
| 270 | Pipes.tr | 1.17 KB |
| 271 | Pipes.tr | 1.17 KB |
| 272 | Pipes.tr | 1.17 KB |
| 273 | Pipes.tr | 1.17 KB |
| 274 | Piston set 1.ipt | 5.64 MB |
| 275 | Piston set 2.ipt | 5.67 MB |
| 276 | PlasticStructuralUI.xml | 11.9 KB |
| 277 | PlasticStructuralUI.xml | 11.9 KB |
| 278 | Polt.ipt | 81 KB |
| 279 | PropertyMap.xml | 14.2 KB |
| 280 | PropertyMap.xml | 14.2 KB |
| 281 | ProteinMapping.xml | 643 KB |
| 282 | ProteinMapping.xml | 643 KB |
| 283 | ReactionForces.htm | 311 B |
| 284 | ReactionForces.htm | 311 B |
| 285 | ReactionForces.htm | 311 B |
| 286 | ReactionForces.htm | 311 B |
| 287 | RealisticAllowedCommands.xml | 28.9 KB |
| 288 | RealisticAllowedCommands.xml | 28.9 KB |
| 289 | Revised Crossbeam.ipt | 5.6 MB |
| 290 | Revised Crossbeam.ipt | 5.73 MB |
| 291 | RevisionTable.xml | 95.5 KB |
| 292 | RevisionTable.xml | 95.5 KB |
| 293 | Rotor Assembly.iam | 826 KB |
| 294 | Rotor.ipt | 2.49 MB |
| 295 | Rubber hat.ipt | 379 KB |
| 296 | Sheet Metal (DIN).ipt | 69 KB |
| 297 | Sheet Metal (DIN).ipt | 69 KB |
| 298 | Sheet Metal (in).ipt | 72.5 KB |
| 299 | Sheet Metal (in).ipt | 72.5 KB |
| 300 | Sheet Metal (mm).ipt | 69 KB |
| 301 | Sheet Metal (mm).ipt | 69 KB |
| 302 | Sheet Metal.ipt | 72.5 KB |
| 303 | Sheet Metal.ipt | 72.5 KB |
| 304 | SheetMetalRules.xml | 6.53 KB |
| 305 | SheetMetalRules.xml | 6.53 KB |
| 306 | SheetMetalUnfold.xml | 5.77 KB |
| 307 | SheetMetalUnfold.xml | 5.77 KB |
| 308 | Shell.htm | 324 B |
| 309 | Shell.htm | 324 B |
| 310 | Simulation.htm | 1.54 KB |
| 311 | Simulation.htm | 1.54 KB |
| 312 | Simulation.htm | 3.48 KB |
| 313 | Simulation.htm | 3.48 KB |
| 314 | Standard 【屿双网】.dwg | 156 KB |
| 315 | Standard 【屿双网】.dwg | 156 KB |
| 316 | Standard (DIN).iam | 64.5 KB |
| 317 | Standard (DIN).iam | 64.5 KB |
| 318 | Standard (DIN).ipn | 31 KB |
| 319 | Standard (DIN).ipn | 31 KB |
| 320 | Standard (DIN).ipt | 64.5 KB |
| 321 | Standard (DIN).ipt | 64.5 KB |
| 322 | Standard (in).iam | 64.5 KB |
| 323 | Standard (in).iam | 64.5 KB |
| 324 | Standard (in).ipn | 31 KB |
| 325 | Standard (in).ipn | 31 KB |
| 326 | Standard (in).ipt | 64.5 KB |
| 327 | Standard (in).ipt | 64.5 KB |
| 328 | Standard (mm).iam | 64.5 KB |
| 329 | Standard (mm).iam | 64.5 KB |
| 330 | Standard (mm).ipn | 31 KB |
| 331 | Standard (mm).ipn | 31 KB |
| 332 | Standard (mm).ipt | 64.5 KB |
| 333 | Standard (mm).ipt | 64.5 KB |
| 334 | Standard.iam | 64.5 KB |
| 335 | Standard.iam | 64.5 KB |
| 336 | Standard.idw | 159 KB |
| 337 | Standard.idw | 159 KB |
| 338 | Standard.ipn | 31 KB |
| 339 | Standard.ipn | 31 KB |
| 340 | Standard.ipt | 64.5 KB |
| 341 | Standard.ipt | 64.5 KB |
| 342 | Standard.xml | 308 KB |
| 343 | Standard.xml | 308 KB |
| 344 | Steel mold parts.tr | 2.04 KB |
| 345 | Steel mold parts.tr | 2.04 KB |
| 346 | Steel mold parts.tr | 2.04 KB |
| 347 | Steel mold parts.tr | 2.04 KB |
| 348 | Steering Nut.ipt | 225 KB |
| 349 | Steering Nut.ipt | 225 KB |
| 350 | StructuralCommonSchema.xml | 1.71 KB |
| 351 | StructuralCommonSchema.xml | 1.71 KB |
| 352 | StructuralConcreteSchema.xml | 1.16 KB |
| 353 | StructuralConcreteSchema.xml | 1.16 KB |
| 354 | StructuralGenericSchema.xml | 616 B |
| 355 | StructuralGenericSchema.xml | 616 B |
| 356 | StructuralMetalSchema.xml | 723 B |
| 357 | StructuralMetalSchema.xml | 723 B |
| 358 | StructuralPlasticSchema.xml | 616 B |
| 359 | StructuralPlasticSchema.xml | 616 B |
| 360 | StructuralWoodSchema.xml | 2.96 KB |
| 361 | StructuralWoodSchema.xml | 2.96 KB |
| 362 | Stud.ipt | 143 KB |
| 363 | Stud.ipt | 590 KB |
| 364 | Stud1.ipt | 512 KB |
| 365 | StudioLighting.xml | 250 KB |
| 366 | StudioLighting.xml | 250 KB |
| 367 | StudioScene.xml | 23 KB |
| 368 | StudioScene.xml | 23 KB |
| 369 | Surface coatings.tr | 384 B |
| 370 | Surface coatings.tr | 384 B |
| 371 | Surface coatings.tr | 384 B |
| 372 | Surface coatings.tr | 384 B |
| 373 | SurfaceTexture.xml | 22.5 KB |
| 374 | SurfaceTexture.xml | 22.5 KB |
| 375 | Table.xml | 36.6 KB |
| 376 | Table.xml | 36.6 KB |
| 377 | Temp Sensor Screws.ipt | 282 KB |
| 378 | Temp Sensor Screws.ipt | 282 KB |
| 379 | Template.config | 92 B |
| 380 | Template.config | 92 B |
| 381 | Text.xml | 28.5 KB |
| 382 | Text.xml | 28.5 KB |
| 383 | ThermalCommonSchema.xml | 1.94 KB |
| 384 | ThermalCommonSchema.xml | 1.94 KB |
| 385 | ThermalGasSchema.xml | 1010 B |
| 386 | ThermalGasSchema.xml | 1010 B |
| 387 | ThermalLiquidSchema.xml | 1.47 KB |
| 388 | ThermalLiquidSchema.xml | 1.47 KB |
| 389 | ThermalSolidSchema.xml | 2.57 KB |
| 390 | ThermalSolidSchema.xml | 2.57 KB |
| 391 | Thread.xls | 1.41 MB |
| 392 | Thread.xls | 1.41 MB |
| 393 | Tie Rod Nut.ipt | 160 KB |
| 394 | Tie Rod Nut.ipt | 160 KB |
| 395 | Tie Rod.ipt | 81.5 KB |
| 396 | Tie Rod.ipt | 82.5 KB |
| 397 | Tie Rod1.ipt | 77.5 KB |
| 398 | Upper Ball Joint Nut.ipt | 236 KB |
| 399 | Upper Ball Joint Nut.ipt | 236 KB |
| 400 | Upper Control Arm Ball Joint Top Nuts.ipt | 195 KB |
| 401 | Upper Control Arm Ball Joint Top Nuts.ipt | 195 KB |
| 402 | Upper Control Arm.ipt | 1.2 MB |
| 403 | Upper Control Arm.ipt | 1.25 MB |
| 404 | Upper Control Arm1.ipt | 1.03 MB |
| 405 | Upper Control Arm3.ipt | 1.05 MB |
| 406 | ViewAnnotation.xml | 28 KB |
| 407 | ViewAnnotation.xml | 28 KB |
| 408 | Washer.ipt | 101 KB |
| 409 | Weld assemblies.tr | 1.13 KB |
| 410 | Weld assemblies.tr | 1.13 KB |
| 411 | Weld assemblies.tr | 1.13 KB |
| 412 | Weld assemblies.tr | 1.13 KB |
| 413 | Weld.xml | 33.3 KB |
| 414 | Weld.xml | 33.3 KB |
| 415 | WeldBead.xml | 14.3 KB |
| 416 | WeldBead.xml | 14.3 KB |
| 417 | WeldFavorites.ini | 988 B |
| 418 | WeldFavorites.ini | 988 B |
| 419 | Weldment (ANSI - mm).iam | 188 KB |
| 420 | Weldment (ANSI - mm).iam | 188 KB |
| 421 | Weldment (ANSI).iam | 188 KB |
| 422 | Weldment (ANSI).iam | 188 KB |
| 423 | Weldment (BSI).iam | 188 KB |
| 424 | Weldment (BSI).iam | 188 KB |
| 425 | Weldment (DIN).iam | 188 KB |
| 426 | Weldment (DIN).iam | 188 KB |
| 427 | Weldment (GB).iam | 188 KB |
| 428 | Weldment (GB).iam | 188 KB |
| 429 | Weldment (ISO).iam | 188 KB |
| 430 | Weldment (ISO).iam | 188 KB |
| 431 | Weldment (JIS).iam | 188 KB |
| 432 | Weldment (JIS).iam | 188 KB |
| 433 | Weldment.iam | 188 KB |
| 434 | Weldment.iam | 188 KB |
| 435 | WoodStructuralUI.xml | 14.2 KB |
| 436 | WoodStructuralUI.xml | 14.2 KB |
| 437 | am_ansi 【屿双网】.dwg | 260 KB |
| 438 | am_ansi 【屿双网】.dwg | 260 KB |
| 439 | am_bsi 【屿双网】.dwg | 277 KB |
| 440 | am_bsi 【屿双网】.dwg | 277 KB |
| 441 | am_din 【屿双网】.dwg | 327 KB |
| 442 | am_din 【屿双网】.dwg | 327 KB |
| 443 | am_gb 【屿双网】.dwg | 293 KB |
| 444 | am_gb 【屿双网】.dwg | 293 KB |
| 445 | am_iso 【屿双网】.dwg | 302 KB |
| 446 | am_iso 【屿双网】.dwg | 302 KB |
| 447 | am_jis 【屿双网】.dwg | 238 KB |
| 448 | am_jis 【屿双网】.dwg | 238 KB |
| 449 | banjo bolt.ipt | 248 KB |
| 450 | brake 20 percent smaller.ipt | 26.3 MB |
| 451 | brake caliper bolt.ipt | 223 KB |
| 452 | camero rim.ipt | 18.6 MB |
| 453 | camero rim1.ipt | 23.1 MB |
| 454 | carter pin.ipt | 171 KB |
| 455 | carter pin.ipt | 171 KB |
| 456 | carter pin1.ipt | 171 KB |
| 457 | copy_Ball Joint Steering Upper1.ipt | 621 KB |
| 458 | copy_Ball Joint Steering.ipt | 158 KB |
| 459 | copy_Tie Rod.ipt | 77 KB |
| 460 | disk brake 2.ipt | 2.68 MB |
| 461 | disk brake 3.ipt | 3.02 MB |
| 462 | exportdwg.ini | 1.01 KB |
| 463 | exportdwg.ini | 1.01 KB |
| 464 | exportdxf.ini | 1.01 KB |
| 465 | exportdxf.ini | 1.01 KB |
| 466 | harness.iam | 62 KB |
| 467 | harness.iam | 62 KB |
| 468 | importacad.ini | 994 B |
| 469 | importacad.ini | 994 B |
| 470 | importdxf.ini | 986 B |
| 471 | importdxf.ini | 986 B |
| 472 | importmdt.ini | 990 B |
| 473 | importmdt.ini | 990 B |
| 474 | lower control arm.ipt | 2.39 MB |
| 475 | lower control arm.ipt | 2.39 MB |
| 476 | lower control arm1.ipt | 2.66 MB |
| 477 | lugnut.ipt | 243 KB |
| 478 | lugnut1.ipt | 228 KB |
| 479 | minus.png | 167 B |
| 480 | minus.png | 167 B |
| 481 | minus.png | 167 B |
| 482 | minus.png | 167 B |
| 483 | mold base.xml | 113 KB |
| 484 | mold base.xml | 113 KB |
| 485 | offroad 【屿双网】.igs | 61.9 MB |
| 486 | offroad.iam | 7.15 MB |
| 487 | offroad.ipj | 8.56 KB |
| 488 | offroad.ipj.old | 8.3 KB |
| 489 | packngo.log | 8.07 KB |
| 490 | packngo.log | 9.8 KB |
| 491 | performance 11.JPG | 382 KB |
| 492 | performance 2 redacted.jpg | 842 KB |
| 493 | performance 7.JPG | 588 KB |
| 494 | performance 9.JPG | 256 KB |
| 495 | performance motor STRIPPED 【屿双网】.igs | 188 MB |
| 496 | performance motor STRIPPED 【屿双网】.igs | 188 MB |
| 497 | performance motor STRIPPED.iam | 365 KB |
| 498 | performance motor STRIPPED.ipj | 8.56 KB |
| 499 | performance motor STRIPPED.ipj.old | 8.3 KB |
| 500 | performance motor STRIPPED.stp | 133 MB |
| 501 | performance motor.iam | 3.64 MB |
| 502 | piping runs.iam | 248 KB |
| 503 | piping runs.iam | 248 KB |
| 504 | plus.png | 172 B |
| 505 | plus.png | 172 B |
| 506 | plus.png | 172 B |
| 507 | plus.png | 172 B |
| 508 | sign template.iam | 133 KB |
| 509 | sign template.iam | 133 KB |
| 510 | tire.ipt | 56.4 MB |
| 511 | tire1.ipt | 43.7 MB |
| 512 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 513 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要60金币
图纸ID：560789
文件大小：392.39M
软件版本：IGES,STEP,INVENTOR,AUTOCAD 2013
图纸格式：ipt,dwg,igs
参数/编辑：可修改，包括参数
上传时间：2024-03-31
图纸介绍：
发布者
52Hz
作品: 81
粉丝: 0
提示
×
下载该图档需要消耗60金币！
确认下载
客服
签到
分享
